View 440P-MALS11N5_4516039.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Position Interlock Switches
Safety Limit Switches
Large Metal Senator Specifications
Standards EN954-1, ISO13849-1, IEC/EN60204-1, NFPA79, EN1088, ISO14119, IEC/ EN60947-5-1, ANSI B11.19, AS4024.1 Cat. 1 Device per EN954-1 Dual channel interlocks suitable for Cat. 3 or 4 systems cULus, TUV and CE marked for all applicable directives 1 N.C. snap acting, 2 N.C., 3 N.C. or 4 N.C. slow acting 1 N.O. (with 2 N.C.) 600V 500V 240V 120V 1.2A 1.4A 3A 6A 600V 500V 250V 125V 0.4A 0.55A 1.1A 2.2A 5V, 5mA, DC 10A 600V AC 2500V Various (see Product Selection table) 250mm/s 100mm/min 6000 operation per hour Die cast alloy See "Product Selection" table IP 66 Min -25C (-18F) Max 80C (+176F) 3 1 x 107 M20 or 1/2in NPT 2 x M5 Any position Red
Category
Approvals Safety Contacts Auxiliary Contacts Designation/Utilization Cat. A600/AC-15 (Ue) (Ie) N600/DC-13 (Ue) (Ie) Min Current Thermal Current (lth) Rated Insulation Voltage Rated Impulse withstand Volt Travel for Positive Opening Max Switching Speed Min Switching Speed Max Switching Frequency Case Material Actuator Material Enclosure Protection Operating Temperature Pollution Degree Mechanical Life Expectancy Conduit Entry Fixing Mounting Colour
Description
The large metal Senator safety limit switches conform to EN 50041 and have been developed to provide a range of options including metal or plastic cases in various sizes, a choice of snap acting, slow break/make with 2, 3 or 4 contact configurations and a choice of actuator heads. The Senator range offers the option of rotating the head in 90 increments before installation to allow ease of mounting. Allen-Bradley/Guardmaster limit switches can be used in other applications other than guard doors, for example on moving machine beds, crane arms, lifts, elevators, etc. Operation of these limit switches is achieved by the sliding action of the guard or other moving object deflecting the plunger or lever. For safety applications it is important that upon actuation, the guard or other moving objects should not pass completely over the switch and allow the plunger or lever to return to its original position.
Features
* Large selection of actuator heads * Positive operation, forced disconnection of contacts * Snap-acting, slow make before break or slow break before make contact blocks * Contacts 1 N.C. + 1 N.O., 2 N.C. + 1 N.O. 3 N.C., 2 N.C. + 2 N.O., 3 N.C. + 1 N.O., or 4 N.C. * Conforms to EN 50041, EN 1088, EN 60947-5-1, EN 292 and EN 60204-1
Conductive pollution occurs, or dry, non conductive pollution occurs which becomes conductive due to condensation.
Operating Examples
Cam Displacement
(A) 30
Adjustable Lever Arms
30 30 30 30
60
60
60
60
Applications Types
The actuating cam should be profiled at 30 for optimum operation. (Note: Plunger-type switches operate from a flat profile.
7-8
Position Interlock Switches
Safety Limit Switches
Large Metal Senator Product Selection
Contacts Operator Type Contact Type Snap Acting Typical Force/ Torque to Operate Contact Opening Characteristics Open Closed
Positive Opening Point
0mm 11-12 2.3 10N 4.5 7.5
Catalogue Number 1/2in NPT Conduit Quick Disconnect
Safety
Aux.
M20 Conduit
1 N.C
1 N.O
13N
23-24 11-12 23-24 1.3
440P-MRPS11E
440P-MRPS11B
440P-MRPS11N5
0mm
1.4 10N
4.0
7.5
4 N.C
--
--
11N
11-12 21-22 31-32 41-42
440P-MRPB04E
1.4 10N
440P-MRPB04B
440P-MRPB04M9
0mm 11-12
4.0
7.5
3 N.C.
1 N.O
BBM
11N
21-22 31-32 43-44 1.9
440P-MRPB13E
440P-MRPB13B
440P-MRPB13M9
Metal Roller Plunger
0mm 11-12
1.5 10N
4.0
7.5
2 N.C
2 N.O
MBB
11N
21-22 33-34 43-44 1.9
440P-MRPB22E
440P-MRPB22B
440P-MRPB22M9
0mm
2.7 10N
4.5
7.5
1 N.C
1 N.O
Snap Acting
11-12
13N
23-24 11-12 23-24 1.6
440P-MDPS11E
440P-MDPS11B
440P-MDPS11N5
0mm
1.7 10N
4.0
7.5
4 N.C
--
--
11N
11-12 21-22 31-32 41-42
440P-MDPB04E
1.6 10N
440P-MDPB04B
440P-MDPB04M9
0mm 11-12
4.0
7.5
3 N.C.
1 N.O
BBM
11N
21-22 31-32 43-44 2.0
440P-MDPB13E
440P-MDPB13B
440P-MDPB13M9
Metal Dome Plunger
0mm 11-12
1.5 10N
4.0
7.5
2 N.C
2 N.O
MBB
11N
21-22 33-34 43-44 2.0
440P-MDPB22E
440P-MDPB22B
440P-MDPB22M9
83
54
35 35 54 35 cNm 0 35cNm
83
1 N.C
1 N.O
Snap Acting
11-12
0.34Nm
23-24 11-12 23-24 15 15
440P-MSLS11E
440P-MSLS11B
440P-MSLS11N5
83
44
21 0 21 44 35cNm 10cNm
83
4 N.C
--
--
0.20Nm
11-12 21-22 31-32 41-42
440P-MSLB04E
440P-MSLB04B
440P-MSLB04M9
83 11-12
20 20 44 44 35cNm 0 35cNm
83
3 N.C. Metal Short Lever
1 N.O
BBM
0.34Nm
21-22 31-32 43-44 26 26
440P-MSLB13E
440P-MSLB13B
440P-MSLB13M9
83 11-12
20 20 44 44 35cNm 0 35cNm
83
2 N.C
2 N.O
MBB
0.34Nm
21-22 33-34 43-44 26 26
440P-MSLB22E
440P-MSLB22B
440P-MSLB22M9 889N-F5AE-6F 889M-F12X9AE-2
Recommended standard cordset, 2m, 5-pin mini connector. See page 15-12 for additional lengths. Recommended standard cordset, 2m, 12-pin 9 wire. See page 15-12 for additional lengths.
N5 = 5-pin mini connector. M9 = 12-pin M23 connector (use 9 wire).
7-9
Position Interlock Switches
Safety Limit Switches
Large Metal Senator Product Selection (continued)
Contacts Operator Type Contact Type Snap Acting Typical Force/ Torque to Operate Contact Opening Characteristics Open Closed
Positive Opening Point
83 11-12 54 35 35 54 35 cNm 0 35cNm 83
Catalogue Number 1/2in NPT Conduit Quick Disconnect
Safety
Aux.
M20 Conduit
1 N.C
1 N.O
0.34Nm
23-24 11-12 23-24 15 15
440P-MALS11E
440P-MALS11B
440P-MALS11N5
83
21 0 21 44 44 35cNm 10cNm
83
4 N.C
--
--
0.20Nm
11-12 21-22 31-32 41-42
440P-MALB04E
440P-MALB04B
440P-MALB04M9
83 11-12
20 20 44 44 35cNm 0 35cNm
83
3 N.C. Metal Adjustable Lever
1 N.O
BBM
0.34Nm
21-22 31-32 43-44 26 26
440P-MALB13E
440P-MALB13B
440P-MALB13M9
83 11-12
20 20 44 44 35cNm 0 35cNm
83
2 N.C
2 N.O
MBB
0.34Nm
21-22 33-34 43-44 26 26 35 35 54 35 cNm 0 35cNm
440P-MALB22E
440P-MALB22B
440P-MALB22M9
83
54
83
1 N.C
1 N.O
Snap Acting
11-12
0.34Nm
23-24 11-12 23-24 15 15
440P-MARS11E
440P-MARS11B
440P-MARS11N5
83
44
21 0 21 44 35cNm 10cNm
83
4 N.C
--
--
0.20Nm
11-12 21-22 31-32 41-42
440P-MARB04E
440P-MARB04B
440P-MARB04M9
83 11-12
20 20 44 44 35cNm 0 35cNm
83
3 N.C.
1 N.O
BBM
0.34Nm
21-22 31-32 43-44 26 26
440P-MARB13E
440P-MARB13B
440P-MARB13M9
83 11-12
20 20 44 44 35cNm 0 35cNm
83
440P-MARB22E 33-34 43-44 Metal Rod 26 26 Lever Recommended standard cordset, 2m, 5-pin mini connector. See page 15-12 for additional lengths. Recommended standard cordset, 2m, 12-pin 9 wire. See page 15-12 for additional lengths. 2 N.C 2 N.O MBB 0.34Nm
21-22
440P-MARB22B
440P-MARB22M9
889N-F5AE-6F 889M-F12X9AE-2
N5 = 5-pin mini connector. M9 = 12-pin M23 connector (use 9 wire). Not positive opening
7-10
Position Interlock Switches
Safety Limit Switches
Large Metal Senator Product Selection (continued)
Contacts Operator Type Contact Type Snap Acting Typical Force/ Torque to Operate Contact Opening Characteristics Open Closed
90 11-12 32 20cNm 32 0 20cNm 90
Catalogue Number 1/2in NPT Conduit Quick Disconnect
Safety
Aux.
M20 Conduit
1 N.C
1 N.O
0.20Nm
23-24 11-12 23-24 10 10
440P-MSRS11E
440P-MSRS11B
440P-MSRS11N5
90
17 0 17 20cNm 20cNm
90
4 N.C
--
--
0.20Nm
11-12 21-22 31-32 41-42
8
440P-MSRB04E
440P-MSRB04B
440P-MSRB04M9
90 11-12
19 19 20cNm 0 20cNm
90
3 N.C.
1 N.O
BBM
0.20Nm
21-22 31-32 43-44 24 24
440P-MSRB13E
440P-MSRB13B
440P-MSRB13M9
90 11-12
18 18 20cNm 0 20cNm
90
Metal Spring Rod
2 N.C
2 N.O
MBB
0.20Nm
21-22 33-34 43-44 26 26
440P-MSRB22E
440P-MSRB22B
440P-MSRB22M9
90
39 20cNm
39 0 20cNm
90
1 N.C
1 N.O
Snap Acting
11-12
0.20Nm
23-24 11-12 23-24 10 10
440P-MTAS11E
440P-MTAS11B
440P-MTAS11N5
90
24 0 24 20cNm 20cNm
90
4 N.C
--
--
0.20Nm
11-12 21-22 31-32 41-42
8
440P-MTAB04E
440P-MTAB04B
440P-MTAB04M9
90 11-12
23 23 20cNm 0 20cNm
90
3 N.C.
1 N.O
BBM
0.20Nm
21-22 31-32 43-44 30 30
440P-MTAB13E
440P-MTAB13B
440P-MTAB13M9
90 11-12 21-22
24 24 20cNm 0 20cNm
90
440P-MTAB22E 2 N.C 2 N.O MBB 0.20Nm 33-34 43-44 Telescope 31 31 Arm Recommended standard cordset, 2m, 5-pin mini connector. See page 15-12 for additional lengths. Recommended standard cordset, 2m, 12-pin 9 wire. See page 15-12 for additional lengths.
N5 = 5-pin mini connector. M9 = 12-pin M23 connector (use 9 wire). Not positive opening
440P-MTAB22B
440P-MTAB22M9
889N-F5AE-6F 889M-F12X9AE-2
7-11
Position Interlock Switches
Safety Limit Switches
Large Metal Senator Typical Wiring Diagram
4 N.C.
41 31 21 11
1 N.O. 1 N.C.
11 23
1 N.O. 3 N.C.
43 31 21 11
2 N.O. 2 N.C.
43 33 21 11
42
32
22
12
12
24
44
32
22
12
44
34
22
12
Same polarity this side of block
N5 Connector 2 Circuit 5-Pin Mini Connector
1 (N.C.)
11 12
23
24
Auxiliary Circuit (N.O.)
M9 12-Pin M23 Connector
4 N.C. Connector Pinout 1 3 4 6 7 8 9 10 12 Terminal 11 12 21 22 31 32 41 42 Contact N.C. N.C. N.C. N.C. 3 N.C. 1 N.O. Terminal 11 12 21 22 31 32 43 44 Ground Contact N.C. N.C. N.C. N.O. 2 N.C. 2 N.O. Terminal 11 12 21 22 33 34 43 44 Contact N.C. N.C. N.O. N.O.
8 7 6 5 12
9 11
1 10 2 3 4
Approximate Dimensions--mm (inches)
Dimensions are not intended to be used for installation purposes.
17 (0.66) Dia. 21 (0.82) 19 (0.74) 48 (1.88) 34 (1.33) 30 (1.18) 118 (4.64) 60 (2.36) 30 (1.18) 105 (4.13) 63 (2.48) 18 (0.70) Dia. 64 (2.51) 7 (0.27)
60 (2.36)
60 (2.36)
30 (1.18) 133 (5.23)
40 (1.57)
33 (1.29) 43 (1.69)
40 (1.57)
33 (1.29) 43 (1.69)
40 (1.57)
43 (1.69)
Roller Plunger
Dome Plunger
Short Lever
7-12
Position Interlock Switches
Safety Limit Switches
Large Metal Senator Approximate Dimensions--mm (inches) (continued)
Dimensions are not intended to be used for installation purposes.
17 (0.66) Dia. 85 (3.34) Max. 16 (0.62) 64 (2.51) 7 (0.27) 5 (0.19) Dia. 240 (9.44) Max Extension
30 (1.18)
103 (4.05) 172 (6.77) Max. Extension
57 (2.24)
16 (0.62) 103 (4.05) 30 (1.18)
60 (2.36)
60 (2.36)
40 (1.57)
43 (1.69) 40 (1.57)
33 (1.29) 43 (1.69)
Adjustable Lever
Rod Lever
10 (0.39) Dia.
303 (11.92) Min Extends to 900 (35.43) Max
211 (8.3)
60 (2.36)
30 (1.18)
60 (2.36)
30 (1.18)
11 (0.43) 11 (0.43) 40 (1.57) 43 (1.69) 40 (1.57) 43 (1.69)
Spring Rod
Telescopic Arm
7-13

▲Up To Search▲

Price & Availability of 440P-MALS11N5

	To Download 440P-MALS11N5 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .